THE UNIVERSITY of EDINBURGH

DEGREE REGULATIONS & PROGRAMMES OF STUDY 2015/2016

University Homepage
DRPS Homepage
DRPS Search
DRPS Contact
DRPS : Course Catalogue : School of Engineering : Electronics

Postgraduate Course: Analogue VLSI A (ELEE11041)

Course Outline
SchoolSchool of Engineering CollegeCollege of Science and Engineering
Credit level (Normal year taken)SCQF Level 11 (Postgraduate) AvailabilityAvailable to all students
SCQF Credits20 ECTS Credits10
SummaryThe course is primarily a laboratory course that will involve two, three-hour, lab sessions plus a lecture, every week for ten weeks.
The lab is centred on a custom designed ASIC. The ASIC, which was fabricated on the AMS 0.35m CMOS process, contains a number of single transistors and small sub-circuits such as current mirrors, differential stages, a bandgap reference, a simple DAC and a set of passive components.
The ASIC is mounted on a sophisticated, purpose-designed PCB that includes a PIC, a liquid crystal display, DACs, a Direct Digital Synthesis chip and many other devices that serve to support and augment the analogue ASIC. This PCB can communicate directly with a PC via a USB link. The result is a purpose-designed mixed-signal environment where analogue and mixed signal phenomena can be examined in detail.
The whole laboratory course is supported throughout by Cadence simulation, so you will see how simulation and reality fit together, where the differences lie, and how to account for them.

Course description Lectures.
Lectures exist primarily to support the practical work. Therefore, the remaining time, in which new material is introduced, is not always accurately split between lecture slots.
L1 Introduction and Overview
L2 Description of the Cadence suite ¿ on-line example
L3 Description of hardware
L4 Electromigration and its effects
L5 First order MOS models, their limitations, and what can still be gained from using them. Interpretation of standard IC process rules for use in an analogue environment.
L6 Reminder of small-signal analysis as applied to MOS circuits. Important features of various standard analogue circuits that can be derived from small-signal and first-order models
L7-9 Standard components, discrete and integrated, and their limitations
L1 Revision
L11-2 Development of an on-chip band-gap reference, starting from a datasheet right through to fully simulated IC layout (including back-annotated parasitics and non-idealities).
Laboratories
The course is primarily practical: 2 labs of 3 hours assessed lab work each, two per week. Assignments are issued weekly.
Entry Requirements (not applicable to Visiting Students)
Pre-requisites Students MUST have passed:
Co-requisites
Prohibited Combinations Other requirements None
Information for Visiting Students
Pre-requisites2,1 Honours BEng or MEng in Electronics and Electrical Engineering, or equivalent
High Demand Course? Yes
Course Delivery Information
Academic year 2015/16, Available to all students (SV1) Quota:  None
Course Start Full Year
Timetable Timetable
Learning and Teaching activities (Further Info) Total Hours: 200 ( Supervised Practical/Workshop/Studio Hours 70, Formative Assessment Hours 1, Summative Assessment Hours 20, Programme Level Learning and Teaching Hours 4, Directed Learning and Independent Learning Hours 105 )
Assessment (Further Info) Written Exam 0 %, Coursework 100 %, Practical Exam 0 %
Additional Information (Assessment) 60% laboratory assignment, 2 class tests worth 20% each
Feedback Not entered
No Exam Information
Learning Outcomes
The students will understand fundamentals in analogue integrated circuit design. They will be able to use the most up to date industrial simulator for IC design. They will have a good amount of practical experience and will be able to relate measured results to simulated results.
Reading List
None
Additional Information
Graduate Attributes and Skills Not entered
Keywordsanalogue circuit MOS
Contacts
Course organiserDr Martin Reekie
Tel: (0131 6)50 5563
Email:
Course secretaryMrs Sharon Potter
Tel: (0131 6)51 7079
Email:
Navigation
Help & Information
Home
Introduction
Glossary
Search DPTs and Courses
Regulations
Regulations
Degree Programmes
Introduction
Browse DPTs
Courses
Introduction
Humanities and Social Science
Science and Engineering
Medicine and Veterinary Medicine
Other Information
Combined Course Timetable
Prospectuses
Important Information
 
© Copyright 2015 The University of Edinburgh - 21 October 2015 11:49 am